Soil Calculator FAQs

These soil calculator FAQs explain the units, assumptions, and bag estimates behind your garden plan.

Understanding your soil estimate

Use the Soil Yard Calculator to turn your own measurements into volume, area, and whole bags. The questions below also appear in the homepage FAQ window.

How do I calculate cubic yards of soil?

Multiply the garden's area in square feet by its fill depth in feet, then divide by 27. For a rectangle, area is length times width. Divide an inch depth by 12 before multiplying.

How many cubic feet are in one cubic yard of soil?

One cubic yard is exactly 27 cubic feet. This converts volume, not weight; soil weight varies with the material and moisture.

How many 2-cubic-foot bags are in a cubic yard?

27 divided by 2 equals 13.5 bags. Round up to 14 whole 2-cubic-foot bags to cover one cubic yard, before adding any extra allowance.

How much soil do I need for a 12 ft by 8 ft garden bed?

At 6 inches deep, the bed has 96 square feet of area and holds 48 cubic feet, or about 1.78 cubic yards. That takes 24 bags of 2 cubic feet, or 27 bags with the optional 10% extra.

Does this calculator include extra soil for settling?

The main volume is based on your measurements. The optional 10% buffer increases only the bag estimate and the supplementary planning volume. It is a planning allowance, not a prediction of settlement.

Can I calculate soil for a circular garden?

Yes. Choose Circle and enter the diameter in feet, then your fill depth. Area is pi times half the diameter squared. The hidden width field is not used.

What is the difference between topsoil and garden soil?

Topsoil describes an upper soil layer, while bagged garden soil is a product label whose blend can vary. Check the product's ingredients and intended use rather than assuming every soil bag is interchangeable.

How deep should garden soil be?

Use the actual gap you plan to fill. Topping up an existing bed and filling an empty planter need different depths. Plant needs and the existing soil also matter; this calculator does not prescribe a growing depth.

How much area does one cubic yard cover?

Divide 27 cubic feet by your depth in feet. A thinner layer covers more ground; these are theoretical values for an even layer, before an allowance.

Coverage from 1 cubic yard (27 ft³)
Soil depth Area covered
2 inches 162 sq ft
3 inches 108 sq ft
4 inches 81 sq ft
6 inches 54 sq ft
8 inches 40.5 sq ft
12 inches 27 sq ft

The homepage result labeled Measured Area is the geometric area of your shape. It stays the same when you change depth. The table here answers a different question: how far a fixed volume can spread.

Formulas you can check

Bag counts use the full calculation, before display rounding. Displayed volume and area use up to two decimals; tiny positive values use scientific notation rather than appearing to be zero.

Ready to try your dimensions? Open the soil yard calculator or check the raised garden bed example.

Topsoil Calculator

How many cubic yards of topsoil do I need?

Multiply the area in square feet by the depth in inches, then divide by 324. For 600 square feet at 2 inches, the result is about 3.70 cubic yards.

How deep should I spread topsoil?

The appropriate depth depends on whether you are establishing a lawn, correcting a surface, or preparing a planting bed. Use your project specification rather than assuming one depth for every job.

Does topsoil settle after delivery?

Settling varies with material composition, handling, and moisture. The extra allowance is user-controlled and is not an automatic prediction of settling.

Do I need to subtract patios and paths?

Yes. Only include surfaces that will receive new topsoil. Calculate the remaining sections separately if needed.

Should I order exactly the calculated amount?

The cubic-yard result describes geometric volume. Add a purchase allowance only if your supplier or project conditions justify it; no one allowance fits every job.

Garden Soil Calculator

How much soil do I need for my garden?

Calculate the footprint area and multiply it by the new-soil depth. The calculator shows cubic feet, cubic yards, and the number of complete bags.

Can I use topsoil instead of garden soil?

That depends on the intended plants and the material you already have. Garden soil, topsoil, and compost are not always interchangeable products.

How do I calculate bags for a garden bed?

Divide the required cubic feet by the volume printed on one bag and round up to the next whole bag.

How many bags fill a 12-by-8-foot garden at 6 inches?

That area requires 48 cubic feet. If each bag holds 2 cubic feet, the theoretical minimum is 24 full bags.

Can I mix bagged soil sizes?

Yes. Convert all bags to the same volume unit, then compare their combined volume against the required cubic feet.

Raised Bed Soil Calculator

How much soil fills a 4 by 8 raised bed?

At a 10-inch fill depth, one 4-by-8-foot raised bed needs about 26.67 cubic feet, or 0.99 cubic yard.

Should I measure the raised bed from inside or outside?

Use interior dimensions, because boards and posts reduce the space available for soil.

How much space should I leave at the top?

Choose your own intended fill line based on watering and planting needs; the calculator uses the depth you enter rather than imposing a universal gap.

Can I calculate several raised beds at once?

Yes. Multiply the fill volume of each identical bed by the bed count. For beds of different sizes, calculate each separately and add the totals.

Is a 4x8 bed the same volume at every fill depth?

No. The soil amount changes directly with fill depth. A 4-by-8-foot bed filled 6 inches needs 16 cubic feet; filled 12 inches it needs 32 cubic feet.

Soil Coverage Calculator

How much area does one cubic yard of soil cover?

At 1 inch deep, one cubic yard covers 324 square feet. At 3 inches, it covers 108 square feet.

Will two cubic yards cover a 200-square-foot garden?

At 3 inches deep, two cubic yards cover about 216 square feet before any losses.

Does the calculator account for settling?

No. It gives theoretical geometric coverage at the specified depth; field conditions may change the amount required.

How much area will two cubic yards cover at 3 inches?

Two cubic yards provide 54 cubic feet, covering 216 square feet at a uniform depth of 3 inches.

Why does coverage increase as the layer gets thinner?

The same soil volume is spread over a wider area when the layer is thinner. Coverage is inversely proportional to depth.

Soil Bag Calculator

How many 1.5-cubic-foot bags are in two cubic yards?

Two cubic yards equals 54 cubic feet, so you need 36 bags when each bag contains 1.5 cubic feet.

Can I enter a 40-liter bag?

Yes. Convert liters to cubic feet internally before dividing the required volume by the bag capacity.

Why does the calculator round up?

Bags are generally purchased whole. Rounding down would leave part of the calculated soil volume unfilled.

How many 2-cubic-foot bags equal one cubic yard?

One cubic yard is 27 cubic feet, so 14 whole 2-cubic-foot bags are needed to meet or exceed that volume.

Can I include an extra allowance for waste?

Yes. Add an explicit percentage to the required volume before rounding the bag count up to a whole number.

How to Calculate Cubic Yards of Soil

How do I calculate yards of soil by hand?

Find the area in square feet, multiply by depth in inches, and divide by 324.

Why do I divide by 324?

There are 12 inches in a foot and 27 cubic feet in a cubic yard; 12 × 27 = 324.

How many cubic feet are in one cubic yard?

One cubic yard equals exactly 27 cubic feet.

Can I calculate soil from square footage alone?

Not exactly. You also need the planned depth to turn an area into a volume.

How many yards of soil do I need for 200 square feet at 3 inches?

Multiply 200 by 3 and divide by 324. The geometric result is about 1.85 cubic yards.

What if I measured the depth in feet?

Multiply square feet by depth in feet to get cubic feet, then divide by 27 to convert to cubic yards.

Lawn Topsoil Calculator

How do I calculate topsoil for a new lawn?

Multiply the lawn area in square feet by the new topsoil depth in inches and divide by 324.

Is lawn topsoil the same as lawn topdressing?

No. New-lawn preparation can involve a larger soil addition, while topdressing usually means applying a thin layer to an existing lawn.

Should I include walkways in my lawn area?

Exclude areas where soil will not be spread, such as patios, driveways, and walkways.

How many cubic yards of topsoil for 1,200 square feet at 3 inches?

The geometric result is 1,200 × 3 ÷ 324, or about 11.11 cubic yards.

Should I use the total soil depth or only new soil depth?

Enter only the thickness of soil you are adding. Existing soil beneath that layer is not part of the purchased volume.

Lawn Topdressing Calculator

How much topdressing do I need for 1,000 square feet?

At a quarter-inch depth, 1,000 square feet needs approximately 0.77 cubic yard.

Can I enter one-eighth of an inch?

Yes. One-eighth inch is 0.125 inch and can be used directly in the volume formula.

Is topdressing the same as leveling a lawn?

Not always. Topdressing commonly uses a relatively even, thin layer; leveling may require differing fill depths in low spots.

How many yards for 1,000 square feet at one-eighth inch?

The geometric volume is 1,000 × 0.125 ÷ 324, or approximately 0.39 cubic yard.

Can I spread one-half inch in one application?

Appropriate thickness depends on grass health, material, and local growing conditions. The calculator estimates volume only, not a universal application recommendation.

Lawn Leveling Soil Calculator

How do I calculate soil for uneven lawn areas?

Multiply each low spot’s area by its average fill depth, calculate its volume, and add the zones together.

Can I use one depth for the whole lawn?

You can, but separate zones usually make estimates more meaningful when low spots vary a lot.

Does this calculate the ideal leveling mix?

No. It calculates quantity only; the material choice depends on the lawn and local recommendations.

Why use an average fill depth rather than the deepest spot?

Using the maximum depth for an entire zone can overstate the needed volume. An estimated average better represents the actual empty space.

Can I add areas with different depths?

Yes. Calculate area × average depth for each zone, sum the cubic-foot volumes, then convert the total to cubic yards.

Fill Dirt Calculator

How much fill dirt do I need for a 12 by 6 by 2-foot hole?

The geometric volume is 144 cubic feet, which is about 5.33 cubic yards.

Does the estimate include compaction?

No. It calculates geometric volume and can add a manual purchase allowance, but it cannot predict a site-specific compaction ratio.

Can I use fill dirt in planting beds?

Fill dirt is commonly used for grading and filling. Check whether the material is suitable before using it as a planting medium.

Is fill dirt volume the same before and after compaction?

Not necessarily. Loose and compacted material can occupy different volumes; the tool does not infer a site-specific compaction factor.

Can I calculate an irregular hole?

Divide the area into measurable sections, estimate each section with a suitable geometric shape, and add the calculated volumes.

Flower Bed Soil Calculator

How much soil does a 15-by-4-foot flower bed need?

At 4 inches deep, the bed needs 20 cubic feet, or about 0.74 cubic yard.

How can I measure an L-shaped flower bed?

Split the shape into two non-overlapping rectangles, calculate each, and add the volumes.

Should I use potting mix in an in-ground flower bed?

Different products have different intended uses. Check the supplier description rather than choosing a soil solely by its name.

Can I calculate an L-shaped flower bed?

Yes. Divide the footprint into two non-overlapping rectangles, calculate each volume, and add them together.

How much soil for a 15-by-4-foot flower bed at 4 inches?

The bed requires 15 × 4 × 4 ÷ 12 = 20 cubic feet, or about 0.74 cubic yard.

Planter Box Soil Calculator

How much soil fits a 48-by-24-by-18-inch planter?

A rectangular planter with those interior fill dimensions holds 12 cubic feet, or approximately 340 liters.

Can I calculate a planter in inches?

Yes. Multiply the three inside dimensions in inches and divide by 1,728 to get cubic feet.

Does the calculation account for drainage rocks?

Only if you reduce the effective soil fill height or subtract the occupied volume. It does not automatically assume a drainage layer.

Why should I use inside dimensions?

Exterior measurements include the thickness of the container walls and can overestimate the soil cavity.

How much is 12 cubic feet in liters?

Twelve cubic feet equals approximately 339.80 liters using 28.316846592 liters per cubic foot.

Soil Weight Calculator

How much does one cubic yard of soil weigh?

It depends on soil composition, moisture, and bulk density. Enter a density value to get an estimate rather than assuming a universal weight.

How do I convert soil cubic yards into pounds?

Multiply cubic yards by 27 cubic feet per yard, then multiply by pounds per cubic foot.

What is a US short ton?

One US short ton is 2,000 pounds. It is different from a metric tonne, which is 1,000 kilograms.

Does wet soil weigh more than dry soil?

Often yes, because retained water contributes to total mass. Actual weight depends on the material and moisture conditions.

Is a US short ton the same as a metric tonne?

No. One US short ton is 2,000 pounds. One metric tonne is 1,000 kilograms.

Soil Cost Calculator

How much will three cubic yards of soil cost?

At an example price of $42 per cubic yard plus a $55 delivery fee, the estimated total is $181 before any tax.

Does the calculator use live local soil prices?

No. Enter your supplier quote and delivery fee to calculate your own total.

Should delivery be included in tax?

Tax treatment varies by jurisdiction. The calculator must label its assumed taxable basis and allow users to adjust the input as needed.

Does this calculator show live soil prices near me?

No. It calculates a total from prices and fees you provide; it does not fetch local supplier quotes.

What if my supplier charges tax on soil but not delivery?

Use the correct taxable basis for your quotation. Delivery tax treatment varies by location and is not assumed universally.

Bulk vs Bagged Soil Calculator

Is bulk soil cheaper than bagged soil?

It depends on the volume, bag price, bulk quote, and delivery fees. Enter your own prices to compare both totals.

How many bags equal two cubic yards?

Two cubic yards equals 54 cubic feet, so 36 bags of 1.5 cubic feet provide the same volume.

Why is the bagged amount sometimes slightly higher?

The bag calculation rounds up to a whole bag, so the purchased volume may exceed the exact requirement.

Why does the bagged option buy slightly more soil?

Bags must be purchased in whole units, so the purchased volume may exceed the exact soil requirement.

Does the comparison include delivery fees?

Bulk delivery is included when entered. Any separate bag-delivery charge must also be entered to make the totals comparable.

Soil Mix Calculator

What soil mix ratio should I use?

There is no single ratio suitable for every plant and project. Enter the proportions supported by your planting plan or supplier advice.

Do the percentages have to total 100?

Yes. The tool checks that all ingredient percentages sum to 100 before splitting the target volume.

Can I measure ingredients in cubic feet?

Yes. The underlying proportions are unit-independent; convert each resulting volume to cubic feet if needed.

Can I change the percentages for each ingredient?

Yes. Enter the planned proportions. The calculator only divides volume when the ingredient shares add up to 100 percent.

Does this tool recommend a soil mixture for every plant?

No. It calculates a custom volume split and does not determine the best recipe for a particular plant, climate, or soil condition.

Round Garden Bed Soil Calculator

How do I calculate soil for a round garden bed?

Find the circular area using π × radius squared, then multiply by depth in inches and divide by 324.

Is radius the same as diameter?

No. Radius is half the diameter, so using diameter as radius would make the area four times too large.

How much soil for a 12-foot round bed at three inches?

It needs approximately 1.05 cubic yards, before any user-chosen purchase allowance.

How much soil for a 12-foot round bed at 3 inches?

A 12-foot-diameter circle covers about 113.10 square feet and needs approximately 1.05 cubic yards at 3 inches deep.

Can I use the diameter instead of radius?

Yes. The calculator converts diameter to radius by dividing it by two before using the area formula.