Lawn Topsoil Calculator — Plan Your New Lawn
Estimate the new topsoil layer for a lawn area.
Measure the new lawn
Example result
- Geometric volume
- 11.11 yd³
- Cubic feet
- 300.00 ft³
- Order quantity
- 11.11 yd³
- New lawn area
- 1,200.00 ft²
Lawn area × new layer depth in inches ÷ 324. Order quantity applies your extra percentage.
Showing the prefilled example.
How to use Lawn Topsoil Calculator
- Measure the New Lawn Footprint. Use the surface area being prepared, excluding paving and existing flower beds.
- Specify Your New Topsoil Layer. Choose a project-specific added depth; do not confuse this with total root-zone soil depth.
- Plan Materials Before Delivery. Check access, material type, and supplier measurement units before ordering.
What you can calculate
- Area-first soil estimates for a new lawn.
- Separate geometric and optional order quantities.
- Links to topdressing and general topsoil calculations.
See the Penn State Extension guidance on new and established turf.
Worked example
1,200 ft² × 3 in ÷ 324 = 11.11 yd³ (300 ft³). This example shows geometric or user-specified inputs, not a universal material recommendation.
Frequently asked questions
How do I calculate topsoil for a new lawn?
Multiply the lawn area in square feet by the new topsoil depth in inches and divide by 324.
Is lawn topsoil the same as lawn topdressing?
No. New-lawn preparation can involve a larger soil addition, while topdressing usually means applying a thin layer to an existing lawn.
Should I include walkways in my lawn area?
Exclude areas where soil will not be spread, such as patios, driveways, and walkways.
How many cubic yards of topsoil for 1,200 square feet at 3 inches?
The geometric result is 1,200 × 3 ÷ 324, or about 11.11 cubic yards.
Should I use the total soil depth or only new soil depth?
Enter only the thickness of soil you are adding. Existing soil beneath that layer is not part of the purchased volume.