Fill Dirt Calculator — Plan Backfill Volume

Estimate the geometric fill volume for holes and low areas.

Measure the fill space

Fill cavity 12 ft × 6 ft × 2 ftGeometric estimate for a rectangular space.

Example result

Geometric fill
5.33 yd³
Order with allowance
5.33 yd³
Cubic feet
144.00 ft³
Added allowance
0.00 yd³

Length × width × height in feet. Enter a project allowance separately from any engineered compaction requirement.

Showing the prefilled example.

Excavated ground and fill material near bridge construction
Estimate the fill space Measure the void and enter any purchasing allowance separately. Bill Nicholls · CC BY-SA 2.0 · Resized for web

How to use Fill Dirt Calculator

  1. Measure the Void. Use the dimensions of the space being filled. For irregular holes, split the area into approximated solids.
  2. Understand Compaction. Delivered loose soil and placed compacted soil may occupy different volumes; actual compaction needs site-specific information.
  3. Add Your Own Allowance. The optional percentage is entered by the user, not a suggested engineering factor.

What you can calculate

  • Three-dimensional fill volume for simple holes.
  • Optional user-specified purchase allowance.
  • A clear distinction between geometry and compaction.

Worked example

12 ft × 6 ft × 2 ft = 144 ft³ = 5.33 yd³; at 10% user-entered extra, 5.87 yd³. This example shows geometric or user-specified inputs, not a universal material recommendation.

Frequently asked questions

How much fill dirt do I need for a 12 by 6 by 2-foot hole?

The geometric volume is 144 cubic feet, which is about 5.33 cubic yards.

Does the estimate include compaction?

No. It calculates geometric volume and can add a manual purchase allowance, but it cannot predict a site-specific compaction ratio.

Can I use fill dirt in planting beds?

Fill dirt is commonly used for grading and filling. Check whether the material is suitable before using it as a planting medium.

Is fill dirt volume the same before and after compaction?

Not necessarily. Loose and compacted material can occupy different volumes; the tool does not infer a site-specific compaction factor.

Can I calculate an irregular hole?

Divide the area into measurable sections, estimate each section with a suitable geometric shape, and add the calculated volumes.